Machine Tool
*CE correspondence
【Important】The max. draw bar pull force and the max. static gripping force in the following specifications are for external diameter gripping.
When used for internal diameter gripping, the draw bar pull force must be less than half of the max. draw bar pull force.
| Model | B-204 | B-205 | B-206 | B-208 | ||
|---|---|---|---|---|---|---|
| Through-hole (mm) | 26 | 33 | 45 | 52 | ||
| Gripping Range (mm) | Max. | 110 | 135 | 169 | 210 | |
| Min. | 7 | 12 | 16 | 13 | ||
| Jaw Stroke (Diameter) (mm) | 5.4 | 5.4 | 5.5 | 7.4 | ||
| Plunger Stroke (mm) | 10 | 10 | 12 | 16 | ||
| Max. Draw Bar Pull Force (kN) | 14 | 17.5 | 22 | 34.8 | ||
| Max. Static Gripping Force (kN) | 28.5 | 36 | 57 | 86 | ||
| Max. Speed (min-1) | 8000 | 7000 | 6000 | 5000 | ||
| Moment of Inertia (kg･m2) | 0.007 | 0.018 | 0.058 | 0.17 | ||
| Net Weight (kg) (with Soft Top Jaws) | 4 | 6.7 | 11.9 | 22.3 | ||
| Matching Cylinder | F0933H | F0933H | S1246 | S1552 | ||
| Matching Soft Jaws Note) Jaw-mounting bolts are not included. |
Standard Extra Tall |
Standard Extra Tall |
Standard Extra Tall |
Standard Extra Tall |
||
| Matching Hard Jaws Note) Jaw-mounting bolts are not included. |
HB04N1 | HB04N1 | HB06A1 HB06B1 |
HB08A1 | ||
| Outline Drawing | 2D |  |
|
|
|
|
| DXF |  |
|
|
|
||
| DWG |  |
|
|
|
||
| 3D | Parasolid |  |
|
|
|
|
| STEP |  |
|
|
|
||
| Model | B-210 | B-212 | B-215 | ||
|---|---|---|---|---|---|
| Through-hole (mm) | 75 | 91 | 100 | ||
| Gripping Range (mm) | Max. | 254 | 304 | 381 | |
| Min. | 31 | 34 | 50 | ||
| Jaw Stroke (Diameter) (mm) | 8.8 | 10.6 | 10.6 | ||
| Plunger Stroke (mm) | 19 | 23 | 23 | ||
| Max. Draw Bar Pull Force (kN) | 43 | 55 | 98 | ||
| Max. Static Gripping Force (kN) | 111 | 144 | 249 | ||
| Max. Speed (min-1) | 4200 | 3300 | 2800 | ||
| Moment of Inertia (kg･m2) | 0.315 | 0.738 | 2.2 | ||
| Net Weight (kg) (with Soft Top Jaws) | 34.5 | 55.3 | 116 | ||
| Matching Cylinder | S1875 | S2091 | F2511H | ||
| Matching Soft Jaws Note) Jaw-mounting bolts are not included. |
Standard Extra Tall |
Standard Extra Tall |
Standard Extra Tall |
||
| Matching Hard Jaws Note) Jaw-mounting bolts are not included. |
HB10A1 | HB12N1 | HB15N1 | ||
| Outline Drawing | 2D | |
|
|
|
| DXF | |
|
|
||
| DWG | |
|
|
||
| 3D | Parasolid | |
|
|
|
| STEP | |
|
|
||
Note) The 3D data includes two types of the positions of the jaws for both Parasolid and STEP: open end (UC) and closed end (OC).
Wide variety of world’s standard power chuck
High gripping force & stability to suit various requirements
Necessary item for Quality control and Safety
Standard Manual Chucks suit to a high-mixture of work pieces and low-volume production.
High performance Rotary Cylinder is integral to for the operation of a power chuck and extracts the maximum capability of the chuck.
Compact & high accuracy Combination with chuck is available.
Tail stocks, tail spindles, rotary joints, rotary chucks and others
Toggle joint mechanism Long jaw stroke
Stationary power chuck with built-in cylinder
Kitagawa's original grippers with high-quality and high-durability
Strongly support factory automation and unmanned operation
Various catalogues can be downloaded.
Various flyers can be downloaded
Information on discontinued products is posted.
