kitagawa

Language

Japan

Japanese

Machine Tool

Ultra compact NC rotary table
CK(R) series

The world’s thinnest body

CK(R) series ズーム

CK(R) series

  • Ultra compact body and smallest footprint NC rotary table
  • Suitable for using with trunnion jig
  • Block-less rotary joint (CKR160 and CKR200)
  • Suitable for small footprint machining centres

*CE correspondence

Product Specifications

ModelCK160CKR160
Right-handed type ○ ○
Left-handed type ○ ○
Table Diameter (mm) ø114 ø114
Centre Hole Diameter (mm) ø65H7 ø65H7
Through Hole Diameter (mm) ø65 -
Centre Height (mm) 140 140
Clamping Method Pneumatic Pneumatic
Clamping Torque (N･m)
(at 0.5 MPa)		 340 340
Motor Axis Reduction Inertia (kg･m2) 0.00009 0.00009
Servomotor (for Fanuc spec.) αiF 2/5000-B αiF 2/5000-B
Total Reduction Ratio 1/72 1/72
Max. Rotation Speed (min-1) 41.6
(at motor 3000min-1)		 41.6
(at motor 3000min-1)
Allowable Work Inertia (kg･m2) 0.51 0.51
Indexing Accuracy (sec) 20 20
Repeatability (sec) 4 4
Mass of Product (kg) 40 41
Allowable LoadHorizontal (kg) 160 160
Vertical (kg) 80 80
Tail Spindle (as an option) MSRC140/TSRC140
MSR142A/TSR142A		 MSRC140/TSRC140
MSR142A/TSR142A
Rotary Joint (as an option) - Hydraulic/Pneumatic 7 ports
Note 1)
Outline DrawingKitagawa Own Controller Spec.2DPDF
TIF
DXF
DWG
3DParasolid
STEP
4th axis spec.
(Fanuc spec.)		3DParasolid
STEP
Option
Outline Drawing		 Tail Spindle
ModelCK200CKR200
Right-handed type ○ ○
Left-handed type ○ ○
Table Diameter (mm) ø130 ø130
Centre Hole Diameter (mm) ø65H7 ø65H7
Through Hole Diameter (mm) ø65 -
Centre Height (mm) 150 150
Clamping Method Pneumatic Pneumatic
Clamping Torque (N･m)
(at 0.5 MPa)		 400 400
Motor Axis Reduced Inertia (kg･m2) 0.00017 0.00017
Servomotor (for Fanuc spec.) αiF 2/5000-B αiF 2/5000-B
Total Reduction Ratio 1/120 1/120
Max. Rotation Speed (min-1) 25
(at motor 3000min-1)		 25
(at motor 3000min-1)
Allowable Work Inertia (kg･m2) 1.00 1.00
Indexing Accuracy (sec) 20 20
Repeatability (sec) 4 4
Mass of Product (kg) 47 49
Allowable LoadHorizontal (kg) 160 160
Vertical (kg) 80 80
Tail Spindle (as an option) MSRC150/TSRC150 MSRC150/TSRC150
Rotary Joint (as an option) - Hydraulic/Pneumatic 8 ports
Note 1)
Outline DrawingKitagawa Own Controller Spec.2DPDF
TIF
DXF
DWG
3DParasolid
STEP
4th axis
(Fanuc spec.)		3DParasolid
STEP
Option
Outline Drawing		 Tail Spindle

Note 1) All ports are available for both pneumatic and hydraulic, not available for coolant.
Note 2) Please consult Kitagawa distributor for Tail stocks.

Machine Tool product lineup

PAGE TOP