DM100・DME100｜Machine Tool Products

Machine Tool

Wire EDM dedicated NC rotary table
DM100・DME100

Reliable performance even in water
Lightweight & compact
Stainless steel construction and special seal prevent rust and ensure waterproofing.
High accuracy & high performance
Built-in current collector allows maintenance free
Vertical use only
Patented in Japan (No. 4354773)

*CE correspondence

Model		DM100	DME100
Table Diameter (mm)		ø100	ø100
Centre Hole Diameter (mm)		ø45H7	ø45H7
Through Hole Diameter (mm)		ø40	ø26 / ø36
Centre Height (mm)		65	65
Motor Axix Reduced Inertia (kg･m²)		0.000054	0.000054
Servomotor (for Fanuc spec.)		βM 0.5/4000 / βiS 0.5/6000	βM 0.5/4000 / βiS 0.5/6000
Total Reduction Ratio		1/120	1/120
Max. Rotation Speed (min^-1)	4th axis spec. (Fanuc spec.)	3.0 (at motor 360min^-1)	3.0 (at motor 360min^-1)
Max. Rotation Speed (min^-1)	M signal spec.	3.0 (at motor 360min^-1)	-
Min. Rotation Speed (min^-1)	4th axis spec. (Fanuc spec.)	0.00275 (at motor 0.33min^-1)	0.00275 (at motor 0.33min^-1)
Min. Rotation Speed (min^-1)	M signal spec.	0.03 (at motor 3.6min^-1)	-
Allowable Work Inertia (kg･m²)		0.025	0.025
Indexing Accuracy (sec)		30	16
Repeatability (sec)		5	4
Mass of Product (kg)		20	25
Allowable Electrode Current (A)		20	20
Protection Class		IP68 (submerged 0.5m) However,piping opening part is excluded.	IP68 (submerged 0.5m) However,piping opening part is excluded.
Allowable Load	Vertical (kg)	20	20
Manual Tailstock (as an option)		DM100RN01	DM100RN01
Outline Drawing	2D



	3D
	3D